CZ 75 SP-01 Tactical red dot mounts

CZ 75 SP-01 Tactical red dot mounts replace the rear sight in the dovetail so you can add an optic to a non-Optics Ready Tactical slide—no milling and fully reversible.

Why on the Tactical?

• Keep the slide original: install a dot without permanent work or refinishing.
• Test & tune: try different optics/positions before committing to other solutions.
• Quick revert: return to irons in minutes for rules, carry, or resale.

Footprints commonly supported

• Trijicon RMR footprint
• Shield RMSc footprint
• Holosun K-series footprint
• Leupold DPP footprint
• C-More RTS footprint
• Vortex Venom / Docter footprint
• Aimpoint ACRO footprint

Install checklist

• Degrease interfaces and screws; apply Loctite threadlocker.
• Torque to spec for mount-to-slide and optic-to-mount screws; re-check after your first range session.
• Verify screw length & pitch so nothing protrudes into the slide channel.

Model notes

If you also run an Optics Ready CZ, a plate gives a lower, more rigid interface—see Optics Ready plates.